Posted by Frenchic Admin
ArtResin instructions and guide to successful epoxy resin projects
Looking for clear epoxy instructions?
On this page, you’ll find step-by-step instructions for using ArtResin epoxy resin, including the correct mixing ratio, application, drying, and curing. We’ll also explain how to avoid common issues such as air bubbles, a sticky surface, and an uneven finish.
ArtResin is a high-quality, clear, UV-protected epoxy resin suitable for artworks, trays, tabletops, jewelry, wood surfaces, and many other woodworking, art, and interior design projects.
Choose safe, crystal-clear ArtResin epoxy to finish your projects
- Easy to use: Mixing ratio 1:1. Coverage depends on the thickness of the pour.
- Excellent UV protection: UV and HALS stabilization effectively protects the resin from yellowing and helps preserve a clear finish for a long time.
- Safe to use at home: Use in a well-ventilated area. Contains no VOCs or BPA, produces no strong fumes, and is non-flammable. Non-toxic and suitable for food contact when cured according to the instructions.
- Perfect for art, woodworking, and jewelry projects: Creates a highly glossy, crystal-clear, self-leveling, and durable finish.
- Made in the USA: ArtResin is an epoxy resin trusted by artists and makers around the world.
- Warning: ArtResin can be addictive. After your first project, new ideas may start appearing almost on their own.
ArtResin details at a glance
-
- pour in 3 mm layers
- working time 45 min
- mixing time 3 min
- Safety equipment and toxicity: ArtResin meets the requirements of ASTM D-4236 standards and has been assessed as non-toxic and safe for home use when used as directed.
- We recommend always wearing gloves and safety glasses and working in a well-ventilated area.
- ArtResin is food-safe
- The market's most effective yellowing protection
- 0 VOC
- ArtResin is not self-igniting
ARTRESIN EPOXY INSTRUCTIONS AND A GUIDE TO SUCCESSFUL EPOXY WORK
MEASURE
Wearing gloves, pour equal amounts of resin and hardener into a mixing cup.
You can use our resin coverage calculator to figure out how much you need.
TIP - Mix a little more than you think you'll need, so you can cover your piece completely in one go and won't need to mix more later.
MIX THOROUGHLY AND FOR A LONG TIME
Mix really well - for at least 3 minutes. Scrape the sides and bottom to make sure you mix thoroughly (unmixed material will leave sticky spots that simply won't cure).
Once the resin and hardener are combined, you have about 45 minutes of working time before the resin thickens and cures.
ArtResin is not self-igniting and contains UV protection, so the surface won't yellow.
The result is a perfectly clear, stunning, high-gloss surface.
You can color ArtResin epoxy yourself using the kit's own colorants, alcohol inks, paint, etc.
See more tips and instructions on the manufacturer's website www.artresin.com
WAIT
Once you've made sure your piece is level (use a spirit level), pour ArtResin® epoxy over it. Don't worry! It will begin to level itself out, and you can spread it into place.
Let the resin flow over the edges, then use just a brush or spatula to tidy it up. You'll notice the bubbles start to rise to the surface.
Many of them will pop on their own, but you can also pop them yourself for a flawless finish - a small torch works great for this.
TIP - Wood panels, various boards and plywood are best for large pieces instead of canvas, as they won't sag under the weight of the resin.
WAIT
ArtResin® must be kept in a dust-free area for several hours until it cures.
- After about 8 hours, it is tacky, but you can pour a second layer if needed.
- After about 12 hours, it is dry to the touch, and
- Within 24 hours, it is 95% cured.
It is fully cured within 72 hours.
CLEANING - If you want to reuse your mixing tools, wipe them with a paper towel before the resin dries.
When you work at the right temperature, measure the components carefully, and follow the manufacturer’s instructions, you’ll achieve a durable, crystal-clear, beautiful result.
We’ve compiled all the most important ArtResin instructions in this guide in an easy-to-follow format. You’ll find answers to the most frequently asked questions, along with practical tips to help you succeed with your first epoxy resin project and with more advanced projects.
ArtResin epoxy contains no VOCs and is completely food-safe.
ArtResin is suitable for art projects, both small and large, from jewelry to slab tables, trays, silicone mold casting, and other projects.
CALCULATOR
Easily calculate your required amount with this calculator.
Layering method:
- Pour the first 3 mm layer.
- Remove the bubbles with a torch.
- Cover and leave for 3–5 hours until it reaches a gel-like state.
- Pour the next 3 mm layer, remove the bubbles, cover, and wait another 3–5 hours.
- Repeat..
SILICONE MOLDS AND ART SHEETS
-
See our silicone mold range at this link.
- See our decoupage art sheet range at this link.
- ArtResin range
The non-yellowing ArtResin epoxy surface perfectly protects the colors of your artwork, woodwork, furniture, or decoupage surface.
