Decoupage huonekaluihin – yleisimmät virheet ja niiden välttäminen.
Posted by Frenchic Admin

Decoupage on furniture – common mistakes and how to avoid them

Decoupage on furniture - the most common mistakes and how to avoid them

Decoupage on furniture rarely fails because of the technique. Most often, the cause is small but crucial mistakes. Here are the most common pitfalls and how to avoid them.

1. Poor surface preparation shows in the finished result

A dirty or greasy surface prevents the sheet from adhering. A damaged or pitted surface tears the sheet during application. 

Do this:
Wash the surface thoroughly and let it dry before painting. Use surfaces that are in good condition, and fill and sand as needed. For a smooth finish, the base must also be smooth. 

2. The wrong base color shows through the sheet and changes its colors

A light-colored sheet on a dark base looks gray and lifeless. For example, a white swan will look pink if you apply the sheet directly to a reddish wooden surface. 

Do this:
Choose a light base color if the sheet covers a large area. As a general rule, paint white beneath the sheet if you want its colors to appear true to life. 

3. A layer of adhesive that's too thick damages the sheet 

The sheet gets waterlogged and tears from too much moisture, making it impossible to handle. It takes a very long time to dry. 

Do this:
A thin layer is always better than one thick layer. You don't need a wet layer for adhesion. Use a soft sponge and gently dab the sheet onto the surface. 

4. Cutting the sheet with scissors

Straight edges remain visible and cannot be blended in, even under the paint. 

Do this:
Tear the design or the edges of the sheet with a damp brush.

5. Rushing the finishing touches

Extra layers are left undone, and the result falls short. 

Do this::
Let the layers dry and feel free to add shades and waxes for a stunning result. 

Decoupage instructions, links, and additional information